Glossary

Empty Block

An empty block is a valid Bitcoin block containing only the coinbase transaction, sometimes mined during header-first optimization races.

Key Takeaways

  • An empty block is a valid Bitcoin block that contains only the coinbase transaction and no user transactions. The miner earns the block subsidy but forfeits all transaction fees.
  • Miners produce empty blocks during the seconds after receiving a new block header but before fully validating the previous block: including transactions during this window risks creating an invalid block with conflicting inputs.
  • Improvements like compact block relay (BIP 152) and faster validation pipelines have reduced the frequency of empty blocks from over 10% of all blocks historically to below 1% today.

What Is an Empty Block?

An empty block is a block on the Bitcoin blockchain that contains only one transaction: the coinbase transaction that pays the block reward to the miner. Despite carrying no user transactions, an empty block is fully valid under Bitcoin's consensus rules. It extends the chain, adjusts the difficulty calculation, and awards the miner the current block subsidy.

Empty blocks have been a source of controversy since Bitcoin's early years. Critics argue they waste scarce block space and reduce the network's effective transaction throughput. Defenders counter that mining empty blocks is a rational economic response to block propagation delays and that consensus rules deliberately permit it.

How It Works

To understand why empty blocks occur, consider what happens when a mining pool detects a new block on the network:

  1. The pool receives the new block's header from a peer
  2. The pool begins downloading and validating the full block, which includes verifying every transaction against the current UTXO set
  3. While validation is in progress (typically a few hundred milliseconds), the pool immediately starts hashing a new candidate block on top of the received header
  4. This candidate block includes only the coinbase transaction, because the pool has not yet confirmed which transactions from its mempool are still valid
  5. Once full validation completes, the pool switches to a new block template that includes transactions and their associated fees

If the pool finds a valid nonce during that brief validation window, the result is an empty block. The pool publishes it immediately because the block subsidy alone justifies the effort. This practice is sometimes called "SPV mining" or "validationless mining" because the pool builds on a header it has not fully verified.

Why Not Include Transactions?

The critical constraint is double-spend risk. If the previous block (still being validated) contains a transaction that spends certain UTXOs, and the miner's new block also includes a transaction spending those same UTXOs, the new block would be invalid. The coinbase transaction is the only transaction type that does not reference any prior output, so it can never conflict with the contents of the preceding block. By including only the coinbase, the miner guarantees validity regardless of what the unvalidated block contains.

The Validation Race

The window for producing an empty block is short. Modern Bitcoin nodes can validate a full block in under 500 milliseconds. With compact block relay (BIP 152), the propagation delay itself has shrunk dramatically: instead of transmitting a full block (roughly 1 to 4 MB), nodes exchange short transaction IDs and reconstruct the block from their local mempool. This cuts propagation from megabytes down to roughly 15 to 30 KB in the common case.

As both propagation and validation have gotten faster, the window during which a miner would produce an empty block has narrowed considerably. This is the primary reason empty blocks have become rare.

Economic Tradeoffs

Mining an empty block involves a straightforward cost-benefit calculation:

FactorEmpty BlockFull Block
Block subsidyYes (3.125 BTC as of 2024)Yes (3.125 BTC)
Transaction feesNoneVariable (0.01 to 1+ BTC)
Mining difficultyIdenticalIdentical
Validity riskNone (coinbase-only)Depends on template accuracy
Hashrate utilizationImmediate startDelayed until validation completes

The miner forfeits transaction fees but gains a head start of a few hundred milliseconds of hashrate applied to the next block. When the block subsidy dominates total block revenue (as it still does today), the expected value of those extra hashing cycles can exceed the expected value of the fees that would have been collected. As the subsidy continues to decline through successive halvings, the fee component becomes more significant, and the economic incentive to mine empty blocks weakens further.

Historical Frequency

During Bitcoin's early years, when block propagation was slower and mining software was less optimized, more than 10% of mined blocks were empty. Several factors have driven this number down over time:

  • Bitcoin Core 0.12 (February 2016) introduced validation optimizations that significantly reduced the time between receiving a block and assembling a new template
  • Compact block relay (BIP 152), deployed in Bitcoin Core 0.13.0 in August 2016, reduced block propagation latency by transmitting only short transaction IDs instead of full transactions
  • The FIBRE (Fast Internet Bitcoin Relay Engine) network and its successors provided low-latency relay infrastructure for miners
  • Mining pool software improved to support near-instant template switching after header receipt

Today, empty blocks account for fewer than 1% of all blocks. Individual occurrences still happen: for example, SpiderPool mined an empty block at height 954,352 in 2026. Each event briefly draws attention but is generally recognized as a normal (if increasingly rare) artifact of the mining process.

Why It Matters

Empty blocks sit at the intersection of several important Bitcoin debates: mining centralization, the long-term security budget, and the efficiency of block space usage. Understanding them is essential for evaluating how Bitcoin's fee market functions and how block template construction relates to mining centralization.

For users and applications that depend on fast confirmations, empty blocks introduce a subtle delay: a block is produced, the chain advances, but no pending transactions are confirmed. Layer-2 solutions like the Lightning Network and Spark reduce dependence on layer-1 confirmation speed entirely, processing payments off-chain with instant finality and settling to the base layer only when necessary.

Risks and Considerations

Reduced Transaction Throughput

Every empty block represents wasted capacity. Bitcoin's throughput is already constrained by the block size limit and the roughly 10-minute block interval. An empty block means the network processed zero user transactions in that interval, temporarily increasing the backlog in the mempool and pushing up fee rates for subsequent blocks.

Validation Bypass Risk

When a miner builds on a header without validating the full block, they accept a small risk that the previous block is actually invalid. If it turns out to be invalid, any block built on top of it (including the empty block) will also be rejected by the network, wasting the miner's effort. In practice this is extremely rare, but it represents a deviation from the assumption that every miner fully validates the chain.

Centralization Pressure

Larger mining pools with better network connectivity and lower latency have shorter validation windows, which means they spend less time mining empty blocks and collect more fees on average. This creates a structural advantage for well-connected pools and contributes to mining centralization pressure. Improvements to block relay protocols help level this playing field by reducing propagation advantages.

Security Budget Implications

As the block subsidy diminishes with each halving, Bitcoin's security budget will increasingly depend on transaction fees. If miners routinely forgo fees by mining empty blocks, it could weaken the economic incentives that secure the network. However, this concern is self-correcting: as fees become a larger share of revenue, the cost of mining an empty block rises proportionally, making the practice less attractive.

Code Example

An empty block's structure in the raw Bitcoin protocol is straightforward. The transaction count field is set to 1, and the only transaction is the coinbase:

# Block structure (simplified)
{
  "header": {
    "version": 0x20000000,
    "prev_block_hash": "0000...abcd",
    "merkle_root": "<hash of coinbase tx only>",
    "timestamp": 1700000000,
    "bits": "0x17034219",
    "nonce": 2891347621
  },
  "tx_count": 1,
  "transactions": [
    {
      "txid": "coinbase",
      "inputs": [{ "coinbase": "03a8930e..." }],
      "outputs": [
        { "value": 3.125, "script": "<miner payout address>" }
      ]
    }
  ]
}

The Merkle root in the header is simply the hash of the single coinbase transaction. A full block would include a Merkle tree computed over hundreds or thousands of transactions.

This glossary entry is for informational purposes only and does not constitute financial or investment advice. Always do your own research before using any protocol or technology.